Has your xbox 360 power supply suddenly gone from a solid green colour to a flashing orange? Obviously you will no doubt want to know just what this means right, well the official line from Microsoft is your xbox 360 is overheating and may need to be sent to an xbox repair centre. Microsoft denies that there are any “systemic issues” with console units.
Even though the xbox 360 power supply has its own dedicated internal cooling fans it seems this isn’t efficiently drawing in enough cool air to do the job it was intended for. When you think about the noise the xbox 360 power supply generates from the internal fans you would think the chances of it overheating would be quit slim. Don’t Panic if you do get the flashing orange light though, there are some steps you can take to avoid this from happening in the first place.
Power Tool Accessories
Make sure to leave plenty room around the Xbox 360 Power Supply when setting up your system. If the external air vents are not blocked the power supplys two internal fans can draw in the maximuim air flow.
If you can place the Power Supply in a place away from other sources of heat.
Do not be tempted to stack other electrical devices on top of the power supply unit, this will defenitly raise the tempiture of the unit.
Avoid placing the unit on thick carpet, try keeping it on a solid surface.
Don’t get the Xbox 360 Power Supply problem mixed up with another problem related to the Xbox which is called the “red ring of death”. This fault revolves around the console unit itself and not the power supply unit. The “red ring of death” is also referred to as the ” xbox 360 three red lights” fault and “the red ring of fire”. If you continue to have problems with your Xbox freezing and crashing after ensuring the PSU is well ventilated, at least you have now ruled out PSU as the cause of your problems.
For more information on fixing your Microsoft Xbox 360 and information regarging the Xbox 360 power supply unit see [http://www.xphelp.org.uk/xbox-360-power-supply.html]
Black Friday Dremel 220-01 Rotary Tool Work Station 2011 Deals
Nov 17, 2011 15:09:53
Click for larger image and other views
Black Friday Dremel 220-01 Rotary Tool Work Station Feature
- Rotary tool work station holds more than a dozen Dremel tool models
- Converts to drill press; drills at 90-degree vertical angle and in 15-degree increments to 90 degrees horizontal
- Features a sturdy metal 56-square-inch base
- Includes work station, mounting wrench, and instructions; rotary tool not included
- Backed by a one-year limited warranty
Black Friday Dremel 220-01 Rotary Tool Work Station Overview
Turn that Dremel rotary tool into a drill press with this rotary tool workstation from Dremel. The station accepts several Dremel models to drill perpendicular and angled holes in 15-degree increments from 90 degrees vertical to 90 degrees horizontal. Inch and metric markings on the base make for accurate drilling of workpieces. Depth markings with depth stop provide consistent depth adjustment, while the sturdy metal base with four clamping points holds workpieces securely in place. The workstation also holds the rotary tool steady for other tasks, such as polishing metal objects, sanding different shapes and grinding metal pieces--with greater precision and less fatigue. The stations telescoping shaft allows adjustments to any height between 16 and 29 inches. On-board storage for drill bits, cords, and wrenches keep them all in handy reach.Black Friday Dremel 220-01 Rotary Tool Work Station Specifications
Ideal for crafts, hobbies, metal working, and a variety of around-the-house jobs, the 220-01 Dremel Work Station transforms any Dremel rotary tool into a tabletop drill press. It can be bolted on to your workbench, and it has the versatility to operate as a tool holder, flex shaft holder, and drill press. This rotary tool work station holds Dremel rotary tool models 4000, 3000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 780, 770, and 7700 (tool not included). |
 The Dremel Work Station can be tilted in 15-degree increments. View larger. |
The Dremel Work Station gives you the flexibility to tackle hobbies, fix-it renovations, or special projects without having to invest in a variety of separate tools and attachments. Its stable, sturdy design lets you perform low-torque, high-speed jobs like drilling holes in metal to make earrings and bracelets, or sanding even the most detailed pieces of an architectural model. Measuring 56 square inches, and offering a drill depth of two inches, the sturdy, slotted base has four clamping points, while a rack and pinion feed lever ensures smooth, accurate operation.
Flexibility for Intricate Work
Whether you're buffing stones or sanding parts of a radio-controlled airplane, you'll appreciate that you can tilt the Dremel Work Station in 15-degree increments from 15 to 90 degrees horizontal -- perfect for more focused, intricate work. When you're grinding or polishing materials, the tool holder prevents slippage by keeping tools at 90 degrees, and the telescoping FlexShaft tool stand lets you adjust to any height between 16 and 29 inches. Once you've finished working for the day, place bits, collets, and wrenches in the tool caddy for easy clean-up and storage.
Easy Setup and Durable, User-Friendly Design
Easy to set up and operate, the Work Station features straightforward, durable construction. Clips keep messy cords from obscuring your visibility as you work, and inch and metric markings on the base allow for precise measurements and ensure that your adjustments are consistent, too. Compatible rotary tools attach and detach smoothly so you can polish, grind, or drill holes in stone, metal, or glass for rivets, eyelets, or cold connections of any sort.
What's in the Box
Work Station, accessory nest, mounting wrench, and instructions
 |  |
SAVE NOW on Black Friday offers below!
Available In Stock. |
| This Black Friday Dremel 220-01 Rotary Tool Work Station ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
